From MakerVan Labs
Revision as of 08:48, 16 August 2020 by Severin (further reading, typos and a dedicated reference column)
|Minipops Synthesizer PCB|
Release status: stable [box doku]
|Description||PCB design for Jan Ost's O2 synth (Korg Mini Pops Clone)|
|Last Version||0.1 (2020-08-16)|
|Download||GitHub (PCB), Firmware|
PCB for Jan Ost's O2 Synth
Like the Minipops 7 rhythm box? Yes, the one that Jean Michel Jarre used on the Oxygen album.
Here is the source code to build one yourself.
It runs unmodified on any Arduino.
- Tempo and 16 pattern select CV input.
- 8 drum mute inputs.
- Run/stop input and clock/reset outputs.
You can easily add a CD4067 AMUX chip for driving an analog sequencer in parallel with the rhythm pattern.
The code is licensed as "Free for non commercial use", so I'm not selling these. If you want a PCB, I might have some spares, and I'll give them to you for whatever I paid for it.
- 16 patterns, selectable via potentiometer
- Tempo selectable via potentiometer
- 8 mute switches
- Run/stop switch
- Audio out via 3.5mm stereo plug
- Optional sync out via audio plug, compatible to Teenage Engineering Pocket Operators
|Part of Circuit||Reference||Part Number||Distributor||Amount|
|Arduino||uP1||Arduino Pro Mini 5V 16Mhz||1|
|Potentiometers||RV1, RV2||10kΩ lin, P09 style, e.g. P090S-14T20BR10K||Digikey||2|
|Switches||SW1 - SW9||Kippschalter||mouser||9|
- LED D1 does not shine very bright, probably due to a fairly short clock impulse. Might help to decrease the resistor R1 quite a bit, but I haven't tested that yet.